| PART |
Description |
Maker |
| ATA6631 ATA6629 |
Typically 10 μA Supply Current During Sleep Mode
|
ATMEL Corporation
|
| TLE9266-2QX |
Supply voltage regulator
Very low quiescent current consumption in Stop- and Sleep Mode
|
Infineon Technologies AG
Infineon Technologies A...
|
| MCP6021 MCP6024 MCP6022 MCP6024T-I_ST MCP6021-E_P |
The MCP6022 dual operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6021 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
The MCP6024 quad operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6023 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
Rail-to-Rail Input/Output 10 MHz Op Amps
Rail-to-Rail Input/Output, 10 MHz Op Amps
|
MICROCHIP[Microchip Technology]
|
| A2557SLB A2557EB A2557EEB A2557ELB A2557KB A2557KE |
PROTECTED QUAD LOW-SIDE DRIVER WITH FAULT DETECTION & SLEEP MODE
|
Allegro MicroSystems, Inc.
ALLEGRO[Allegro MicroSystems]
|
| TC59 TC593002ECB TC595002ECB TC595002ECBTR |
The TC59 is a low dropout, negative output voltage regulator designed specifically for battery-operated systems. Its full CMOS construction eliminates the wasted ground current typical of bipolar LDOs. This reduced supply current significa
|
MICROCHIP[Microchip Technology]
|
| IRFH8201PBF |
OR-ing MOSFET for 12V (typical) Bus in-Rush Current
|
Infineon Technologies A...
|
| V23990-P825-F10-P2-19 |
Typical average static loss as a function of output current
|
Vincotech
|
| CY62128EV30LL-45ZAXI |
1-Mbit (128 K × 8) Static RAM Typical standby current: 1 μA
|
Cypress Semiconductor
|
| ATAR080-D-14 |
Very Low Power Consumption in Active, Power-down and Sleep Mode
|
ATMEL Corporation
|
| 6MS24017P43W41646 |
IGBT Stack for typical voltages up to 690 VRMS Rated output current 1175RMS
|
Infineon Technologies A...
|
| Q6012LTH1LEDTP |
Q6012LTH1LED series is designed to meet low load current characteristics typical in LED lighting applications.
|
Littelfuse
|
